| 1. Remove a cowl. |
| 2. Lower pressure in fuel system. |
| 3. Disconnect a wire of the minus plug of the accumulator. |
|
4. If the car is equipped with system cruise control, disconnect a wire from the block of the working mechanism of system and remove the block (bolts of the electronic block of system cruise control are specified by shooters). |
| 5. Remove the accumulator and the accumulator shelf. |
| 6. Remove an airintaking pipe of the air filter. |
| 7. Uncover a jellied mouth of a fuel tank and disconnect the fuel tubes connecting the engine to a body. |
| 8. Remove the fuel filter and a filter arm. |
| 9. Remove a starter. |
|
10. Disconnect a grounding wire (it is specified by an arrow) from a transmission. |
|
11. Unscrew cylinder bolts (the left shooters) hydraulic drive of coupling from a transmission. Do not disconnect a tube from the cylinder. Unscrew capacity bolts with liquid of a hydraulic drive of coupling (the right shooters) and remove an arm of tubes.
|
| 12. Disconnect a rope of the throttle valve and a system rope cruise control from the lever mechanism of a throttle |
| 13. Disconnect all hoses and wires. |
| 14. Remove cooling fans. Merge cooling liquid, remove a radiator, remove all hoses of cooling liquid and heating system hoses. |
| 15. Disconnect gear shifting ropes. |
|
16. Unscrew the top assembly bolts of a transmission.
|
| 17. Remove an arm of a final collector. |
| 18. Weaken bolts of forward wheels. Lift and fix the car on support. Remove forward wheels. |
|
19. Disconnect exhaust pipes from final collectors and from the catalytic converter. Remove forward section of an exhaust pipe (it is specified by shooters). |
| 20. Remove protective guards. |
| 21. Merge engine oil. |
| 22. Remove driving belts. |
| 23. Merge transmission oil. |
| 24. Remove semi-axes. |
|
25. Disconnect steering transfer with the amplifier from a suspension bracket. |
| 26. Unscrew four bolts of an arm of the stabilizer of stability. |
|
27. Tie up steering transfer to a body and unscrew bolts (are specified by shooters). Steering transfer should not disturb transmission removal.
|
|
28. In six-cylinder engines unscrew the bolts, fixing the shock-absorber to a transmission (are specified by shooters).
|
| 29. Unscrew bolts of a forward support of the engine. |
| 30. Remove the left support of the engine and a support arm. |
| 31. Disconnect a back support of the engine from a transmission. |
|
32. Unscrew bolts of a cross-piece of a suspension bracket. |
| 33. Establish a jack under a transmission. |
| 34. Remove a rigidity edge in the left part of a transmission. |
|
35. Unscrew bolts of an arm (And), remove the right edge of rigidity (In) and a trailer disk (C) – the 4-cylinder engine. |
|
36. Bolts of a trailer disk (are specified by shooters) – 6-cylinder engines. |
| 37. Accurately lower a transmission. |